New Server

I got a shaw case off a mate a while back and the powersupply went south in it a few nights ago and now our file server is dead :( what to do what to do ??

I got on the old eBay and found a Dell Poweredge 750 rack mounted server to replace it with real iron and not the consumer stuff we had been running. So here are the specs on the server we bought.

Dell Poweredge 750 1RU Server

• General Features:
• 1U form factor
• Intel Pentium 4 2.8 GHz processor
• 1 MB L2 cache, 800 MHz FSB, Intel Hyper-Threading Technology
• 1 GB ECC DDR SDRAM (supports up to 4 GB)
• 2 x 250 GB SATA hard drive
• DVD ROM drive
• ATI Rage XL video controller with 8 MB memory
• Integrated Gigabit Ethernet
  
• Motherboard Features:
• One (1) 64-bit, 66 MHz PCI-X slot  
• One (1) 32-bit, 33 MHz PCI slot
• Two (2) SATA connectors (one occupied)
• Four (4) 184-pin DIMM sockets (one occupied)
  
• Front I/O ports:
• One (1) USB port
• One (1) 15-pin VGA port
  
• Rear I/O Ports:
• Two (2) PS/2 ports
• Two (2) USB 2.0 ports
• One (1) 15-pin VGA port
• One (1) 9-pin Serial port
• Two (2) RJ-45 Gb Ethernet ports
  
• Case Features:
• One (1) slim type optical drive bay
• One (1) 3.5-inch floppy drive bay
• Two (2) 3.5-inch hard drive bays
  
• Power Specifications:
• 280-watt dual-fan power supply (100 - 240V, 50/60Hz)
  
• Unit Dimensions:
• 1.68 x 16.5 x 21.5-inches (H x W x D, approximate) 

So I will rip out one off the drives and put in my brand new 2 TB drive, The 250 GB drive will be enough to run a few VM's on inside ubuntu server